Adhesive & Repair Resins
URC offers an extensive selection of epoxy adhesives that satisfy the most demanding requirements of any adhesive application. Applications up to and including those that must meet stringent technical requirements of military specifications are easily completed by these systems.
Aluminum Filled Repair Compound/Hardener 205 Exhibits good impact resistance and improved wear resistance. Meets Mil Spec. MIL-R-22628.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.56 250°F 90 9230 PSI 12000 CPS 100:8 65 minutes
 
Autobond/Hardener 506 This system has superior adhesive properties on all metals, rubber and hard plastics (non-polyethylene) and is sandable in 10 to 15 minutes. Used in automotive repairs and all plastic parts repair.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.44 200°F 80 7500 PSI Paste 100:100 5 minutes
 
Autobond SMC/Hardener 109 A non-sag adhesive with superior bonding to all substrates including SMC and stainless steel.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Black 1.65 250°F 85 7500 PSI Paste 100:85 26 minutes
 
Club Head TAC/Hardener 119 This system will never cure. It forms a taffy-like consistency after 3-4 hours. Used to catch fragments inside metal golf club heads.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Amber .996 N/A N/A N/A 2560 CPS 28:100 Never cures
 
E-Cast CCA/Hardener 110 This systems has a rigid cure with excellent adhesion and chemical resistance. It exhibits excellent thermal shock and impact reisistance.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.09 250°F 85 5000 PSI 2800 CPS 100:43 15 minutes
 
E-Cast F-28/Hardener 112 This is an epoxy system that performs as an all-purpose adhesive.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.07 250° 80 4000 PSI 10000 CPS 100:100 7-10 minutes
 
E-Cast F-28/Hardener 380 A general purpose, quick setting epoxy for adhesive and patching applications.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.16 250°F 80 8000 PSI 14000 CPS 100:100 4 minutes
 
E-Cast F-28/Hardener 282 A high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics. Widely used in the golf industry.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.07 250°F 75 5000 PSI 9500 CPS 100:100 2 hours
 
E-Cast F-28/Hardener F-14 Good adhesion to metals, plastics and ceramics. Meets requirements of F.D.A. under 21 CFR 175.300. Widely used in the golf industry.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.12 270°F 85 8000 PSI 11000 CPS 100:80 2.2 hours
 
E-Cast F-82/Hardener 929 This system has excellent adhesion to damp concrete, concrete walls, floors, tanks and pipes.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.05 180°F 80 3446 PSI 160 CPS 100:40 420 minutes
 
E-Cast F-82/Hardener TS-100 This excellent room temperature cure floor sealant was designed for electrostatic sensitive areas.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear/Black 1.09 200°F 80 7500 PSI 400 CPS 100:13 45 minutes
 
E-Cast Sur-Grip/Hardener 282 This is a rubber based epoxy system that exhibits good thermal shock and excellent impact resistance. Used in the golf industry.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.06 250°F 70 3800 PSI 11200 CPS 100:70 4 hours
 
E-Cast Sur Grip/Hardener 620 A high impact, vibratin resistant, flexible adhesive for metals plastics, wood and ceramics. Widely used in the golf industry.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.06 250°F 80 8000 PSI 14000 CPS 100:70 1.75 hours
 
EL-Cast/Hardener 117 A versatile all-purpose adhesive system. Flexible cure, low viscosity and good flow qualities.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Black/White 1.38 250°F 70"A" 2200 PSI 4160 CPS 100:50 70 minutes
 
Epoxy Bond D.G./Hardener 141 This is an unfilled epoxy system with a room temprature cure with excellent adhesion to metals, plastics and cermaics. This is an all purpose adhesive.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.07 250°F 85 9500 PSI 18800 CPS 100:100 30 minutes
 
Epoxy Aluminum Repair Putty/Hardener 987 A durable compound for repair to aluminum castings and tooling applications. When cured this system can be drilled or tapped using conventional metalworking tools.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.70 300°F 90 5000 PSI Paste 100:11 55 minutes
URC Resins URC Resins
Epoxy Aluminum Repair Liquid/Hardener 988 An aluminum-filled pourable epoxy system used for making molds, patterns and holding fixtures. This system permits reproduction of delicate or intricate parts for accurate reproduction of details.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.75 300°F 90 5000 PSI 180000 CPS 100:11 55 minutes
 
Epoxy Metal Repair Compound/Hardener 619 This system is a non-sag compound, with superior compressive and adhesive strength. It adheres to most metals and various substrates. Meets Mil. Spec. DOD-C-24176 Type I
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.44 250°F 70 5000 PSI PASTE 100:100 150 minutes
 
Epoxy Steel Repair Putty/Hardener 987 A ruable compound that can be drilled, tapped, machined or painted when cured. Bonds to steel, aluminum, brass, wood, glass, ceramic and iron. Ideal for patching, repairing and rebuilding steel equipment.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 2.42 300°F 90 5400 PSI 180000 CPS 100:11 45 minutes
 
Epoxy Steel Repair Liquid/Hardener 988 A steel filled pourable epoxy system for maintenance, repair and tooling applications. This system can be cast over models for accurate detail production. When cured, this system can be drilled, tapped, machined or painted.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 2.71 300°F 90 6100 PSI 35000 CPS 100:11 45 minutes
 
Fastweld Putty Stick Use to mold, fill and bond practically anything. Forms a tenacious bond in minutes even underwater. May be drilled, filled and sanded after one hour. Adheres to aluminum, iron, stell, wood, glas, masonry, ceramics and many plastics.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray & White Paste 250°F 90 7000 PSI Putty 100:100 5 minutes
 
Fastwood Putty Stick An epoxy compound for permanent wood repairs such as filling nail holes, replacing and reshaping wood parts and for general restoration. Its unique properties include its ability to be molded to any shape, rapid cure and absolutely no shrinkage or pulling away.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Brown Paste 250°F 85 6000 PSI Putty 100:100 5-7 minutes
 
Large and Small Ceramic Bead Putty/Hardener 987 A trowelable, epoxy system for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation and chemicals. Bonds to steel, aluminum, brass, wood, glass, ceramic and iron.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
White 1.70 250°F 90 5000 PSI Paste 100:11 55 minutes
 
Metalbond-187B Exhibits excellent adhesive properties on metals and is resistant to most chemicals and moisture with a good thermal shock resistance. Meets Mil Spec. MMM-187B.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.32 250°F 80 5000 PSI 250000 CPS 100:100 2.5 hours
 
Metal Filled/Hardener 230 An adhesive and sealing compound for all metals. Meets Mil Spec. MMM-A-1754.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Gray 1.39 370°F 85 4000 PSI 270000 CPS 100:24 2.5 hours
 
Quickbond - Quickbond L.V. Excellent all purpose repair epoxy that can be handled in 5 minutes and cures to full bond strength in one hour. Excellent adhesion to wood, ceramics, metals, fibergalss, glass and china.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.01 250°F 85 8500 PSI Gel / 10400 CPS 100:100 5 minutes
 
Superbond Gel - Superbond Liquid This is a quick set adhesive with superior adhesive properties on all metals, rubber and hard plastics (non-polyethylene) and is sandable in 10 to 15 minutes.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.06 200°F 85/80 3600 PSI Gel / 10000 CPS 100:100 3 - 5 minutes
 
Uni-Bond ECA/Hardener 110 Adhesive and electronic applications such as wire staking, bonding components, strain guages, fiber optics and ferrite cores.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Opaque 1.03 250°F 85 4500 PSI Gel 100:90 20 minutes
 
Uni-Bond ECA/Hardener 620 Adhesive and electronic applications such as wire staking, bonding components, strain guages, fiber optics and ferrite cores.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Opaque 1.09 250°F 85 3000 PSI 73000 CPS 100:50 60 minutes
 
Uni-Bond W.G./Hardener F-14 Used for glass reinforced coating on materials for protection against corrosive effects of salt water. Meets Mil Spec. MIL-R-23461A.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.06 250°F 80 7400 PSI I 800 CPS 100:80 3 - 4 hours
 
Uni-Bond W.G./Hardener TP-41F Widely used in the automotive and aerospace industries as impreg glue.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Clear 1.12 200°F 85 7500 PSI 1810 CPS 100:25 12 minutes
 
Uni-Heat/Hardener 118 A high heat epoxy system designed for applications were elevated temperatures are required, such as in the aircraft industry. Meets Mil Spec. MIL-S-83430A.
Colour Specific Gravity Maximum Use Temp. Hardness Shore "D" Tensile Strength Mixed Viscosity Ratio R/H POT Life 100 Grams @ 72°F
Amber 1.12 350°F 90 8000 PSI 1900 CPS 100:20 60 minutes
 
  Go To Verick.com Go To Tribond.ca Go To ZipClip.ca Go To Solvo.ca