 |
Selection of Industrial Coatings |
| INDUSTRIAL COATINGS |
| Floor Patch |
All-purpose concrete patching compound with a compression strength of 8,000 psi, three times the typical strength of concrete.
|
| Floor Patch FC (Fast Cure) |
A fast curing version of dependable Floor Patch with all of the characteristics of the regular product that cures in just 4 hours.
|
| Ultra Quartz |
Heavy duty, premium floor patching system with excellent chemical resistance. This premium patching system includes a surface priming system for superior bonding to existing concrete or other surfaces.
|
| Epoxy Coat 7000 VOC |
100% solids (no volatile organic compounds) self-leveling floor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant finish.
|
| Epoxy Coat 7000 AR (Acid Resistant) |
100% solids epoxy novalac system designed to protect surfaces from severe acid and chemical attack.
|
| Deep Pour Grout |
An easy-to-mix, self-leveling, filled epoxy grout designed for rebuilding worn concrete or pouring equipment pads up to 6-inches deep.
|
| Ureseal |
A crystal-clear, water-borne urethane floor sealer designed to be applied over previously coated epoxy floors to restore their luster and abrasion resistance.
|
| Safe-T-Grit |
Simple-to-apply non-skid additive that can be mixed into any of our Floor Savers products.
|
| Anti-skid Silica |
An aggregate authorized by USDA for use in federally inspected meat and poultry plants.
|
| Epoxy Coat™ 6000 - Non VOC |
100% solids, self leveling epoxy coating system designed for large contractor applications.
|
| Epoxy Concrete Sealer |
100% solids epoxy that provides a durable, chemical-resistant coating and primer system for damp surfaces.
|
| Concrete Primer 1000 |
100% solids primer system that should be applied to all shot-blasted or acid-etched concrete surfaces to seal them prior to applying any Floor Savers coating products.
|
| Floor Grip |
Heavy duty epoxy compound with silicone carbide granules, for an exceptional non-skid surface on walkways, ramps, loading docks and stairs.
It is brushed or rolled on and then, silicon carbide granules are broadcast over the surface to provide a superior non-skid finish.
|
| Z Cold Galvanizing |
Protects iron and steel from rust and corrosion in both above-ground or underground applications.
|
| B-4 Citric Acid Etch |
Environmentally-safe, citric acid etch that is applied to concrete surfaces to prepare and profile concrete for successful application of Floor Savers Products.
|
