 |
Fastmetal™ Putty |
| Metal Repair and Rebuilding |
| Plastic Steel® Putty (A) |
The original metal-filled epoxy putty used for hundreds of routine maintenance and tooling applications, and rebuilding metal castings and shafts.
|
| Plastic Steel® Liquid (B) |
Steel-filled liquid epoxy can be cast over models for accurate detail reproduction when making holding fixtures, light-gauge forming dies and molds.
|
| Plastic Steel® 5 MinuteÆ Putty (SF) |
Fast-curing, steel-filled epoxy for dependable emergency repairs in less than 1 hour.
|
| Stainless Steel Putty® (ST) |
Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment. NSF certified for potable water applications.
|
| Fasmetal™ (HVAC Repair Putty) |
Aluminum-filled epoxy adhesive, conveniently packaged in two 6 1/2 oz. tubes.
|
| Wear-Resistant Putty (WR-2) |
Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds.
|
| Aluminum Putty (F) |
Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment, widely used in HVAC applications.
|
| Aluminum Liquid (F-2) |
Aluminum-filled pour able epoxy for making molds, patterns, holding fixtures and cosmetic casting repairs.
|
| Bronze Putty (BR) |
Bronze-filled epoxy putty for repairing bronze and brass bushings, shafts, castings and equipment parts.
|
| Titanium Putty |
High-technology, titanium-reinforced epoxy, engineered for making repairs to machinery and equipment that can be precision machined. Ideal for shaft repairs.
|
| Brushable Ceramic |
Alumina-filled, brushable epoxy compound, when applied to a 15-29 mil coating, provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.
|
| Ceramic Putty Repair |
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitations, chemicals, and acids.
|
| Sprayable Ceramic |
A sprayable, ceramic-reinforced composite that can be sprayed in a manner similar to high-solids paints, and is ideal for protecting pumps, paper machines, stacks, pump pads, steel frames and tanks.
|
| Fasmetal |
High-performance alumina-filled epoxy for making fast dependable emergency repairs to leaks in pipes carrying ores, coal, cement, sand, and gravel.
|
| Zip Patch® |
High technology, adhesive-impregnated, patching system that cures at room temperature.
|
| Underwater Repair Putty (UW) |
High performance technology for repairing, patching and rebuilding equipment in habitually wet environments, even under water.
|
| Magic Bond® Epoxy Putty |
A convenient, two-part epoxy putty stick seals leaks and repairs gouges. Waterproof formula cures well under water for plumbing and marine repairs.
|
| Wear Guard (High Load) |
High alumina, ceramic bead-filled, high-density epoxy system for outstanding abrasion resistance to processing equipment with a particulate size greater that 1/8 inch.
|
| Wear Guard (Fine Load) |
Micro-high, alumina, ceramic bead-filled, high-density epoxy system for equipment protection in processes with a particulate size less that 1/8 inch.
|
| Wear Guard (High Temp) |
High temperature and high-density, ceramic bead-filled epoxy system for maximum wear and abrasion to processing equipment in operating conditions of up to 450°.
|
| Combo Wear FC (Fast Cure) |
New, high-tech, three-component (2 bead sizes + silicon carbide) compound for repairing process equipment quickly and returning it to service in as little as 1 - 1/2 hours.
|
| Carbide Putty |
Silicon carbide-filled epoxy for economical protection against wear and abrasion .
|
| Backing Compound & High-Performance Backing Compound |
A low-viscosity, easy-to-pour, high-strength epoxy liquid proven for use in rod, ball, pebble and autogenous mills, as well as in cone and gyratory crushers.
|
