The 752V Series dispense valve systems accurately control the application of most low to medium viscosity fluids. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve.

Valve open time can be as short as 15 milli-seconds.The adjustable open/close stroke (0.005" to 0.025") means very fast response and positive shutoff.

Model 752V-UHSS with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates,anaerobics and fluxes.

A light blocking acetal valve chamber on the 752V-SS provides consistent,bubble-free dispensing of UV-cure polymers.

The 752V Series valves are used with ValveMate 7000 controllers or an EFD ULTRA TT automation system for precise,repeatable outputs of low to medium viscosity fluids.

The 752V Series wetted components are inert plastics and use the same actuating assembly and diaphragm. Each valve can be calibrated with the stroke reference knob for process control.

The amount dispensed depends on valve open time, fluid pressure, fluid viscosity, flow adjustment and tip size.

The complete system includes the 752V Series valve, ValveMate 7000 controller, the fluid reservoir and dispense tip.

Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers a full line of reliable dispensing systems to meet your specific application requirements.